Do you have a Damaged/Cracked or Missing upper ball tray on your Sanyo, Sankyo, Daiichi, Hewa, or other non-Nishijin brand?  We have a solution for you!! This 3D printed Universal Upper Ball Tray fits most brands that use a thin plastic upper tray, which often is broken due to the machine falling over backwards. This tray is of a much heavier design that will take the weight of the balls much better and has a higher capacity than the original.

For many of the brands they were buying the same tray from one supplier and just making very tiny changes to the design. We have added most of the screw hole locations to our tray, you may have to do some slight modifications for some brands. This should fit most Sankyos, Daiichis, and Sanyos with no work. 

IMPORTANT!!!  Before ordering, please check what style tray you have. There are two styles of tray, one where the hole for the balls is close to the backboard, and one where the hole is moved out about 1/2" from the backboard. The track below it will either be the two lanes tight to the backboard or you will see a blank lane and then the two lanes for the balls. (1/2" away type)  This tray will only work for machines where the hole is close to the backboard. Most machines are of this type, but some Sankyos (Dark Green backs) , Maruons, and early Sanyos may have the other style. See the picture of the orange tray to see an example of the close to the backboard style.

Price includes mounting screws and shipping within the 48 states. Other areas & international as ask for a quote.